办公地点：主楼287
科研方向：
（1）电磁冶金
（2）焊接冶金
（2）先进铝合金开发及全程工艺优化
教育经历：
2005/04-2008/04 日本广岛大学 机械工程系 博士
2002/09-2005/03 北京科技大学 新金属材料国家重点实验室 硕士
1998/09-2002/07 河北工业大学 材料科学与工程学院 学士
工作经历：
2023/05-至今 北京科技大学 冶yl6809永利(中国)股份有限公司 教授
2021/07-2023/04 北京科技大学 新金属材料国家重点实验室 研究员
2012/09-2021/06 北京科技大学 新金属材料国家重点实验室 副研究员
2008/05-2012/03 日本大阪大学 焊接科学研究所 博士后研究员
代表性论著 ：
（1）Zhen Zhang, Di Zhang*, Hao Gong, Xinfang Zhang*, Jishan Zhang*, Realizing recrystallization-stabilization temperature range inversion in high Mg content Al alloys via pulsed electric current, Materials Research Letters, Vol. 11, 2023, 179-186
（2）Yingxin Geng, Di Zhang*, Jishan Zhang, Linzhong Zhuang*, Early-stage clustering and precipitation behavior in the age-hardened Al–Mg–Zn (-Cu) alloys, Materials Science and Engineering: A, Vol. 856, 2022, 144015.
（3）Haoran Liu, Zhen Zhang, Di Zhang*, Jishan Zhang*, The effect of Ag on the tensile strength and fracture toughness of novel Al-Mg-Zn alloys. Journal of Alloys and Compounds, Vol. 908, 2022, 164640.
（4）Yingxin Geng, Qi Song, Zhaorui Zhang, Yanlin Pan, Hongxiang Li, Yuan Wu, Huihui Zhu, Di Zhang*, Jishan Zhang, Linzhong Zhuang, Quantifying early-stage precipitation strengthening of Al–Mg–Zn (-Cu) alloy by using particle size distribution, Materials Science and Engineering: A, Vol. 839, 2022, 142851.
（5）Haoran Liu, Zeyu Zhao, Di Zhang*, Jishan Zhang*, Mechanical property and microstructure evolution of novel Al-Mg-Zn(-Cu) alloys under dynamic impact, Materials Science and Technology, Vol. 37, 2021, 852-862.
（6）Di Zhang*, Xin Zhao, Yanlin Pan, Hongxiang Li, Li Zhou, Jishan Zhang, Linzhong Zhuang, The suppression of solidification cracking of Al welds by regulating Zn/Mg ratio, Welding in the World, Vol. 65, 2021, 691-698.
（7）Xuebing Liu, Di Zhang*, Hui Wang, Yu Yan, Xinfang Zhang*, Regulating solute partitioning utilized to decorate grain boundary for improving corrosion resistance in a model Al-Cu-Mg alloy, Corrosion Science, Vol. 181, 2021, 109219.
（8）Di Zhang*, Xu Wang, Yanlin Pan, Shengli Hou, Jishan Zhang, Linzhong Zhuang, Li Zhou, Friction stir welding of novel T-phase strengthened Zn modified Al-Mg alloy, Journal of Materials Science, Vol. 56, 2021, 5283-5295
（9）Yanlin Pan, Di Zhang*, Haoran Liu, Linzhong Zhuang, Jishan Zhang*, Precipitation hardening and intergranular corrosion behavior of Al-Mg-Zn-Cu alloys, Journal of Alloys and Compounds, Vol. 853, 2021, 157199.
（10）Shengli Hou, Di Zhang*, Yanlin Pan, Qingwei Ding, Weimin Long, Jishan Zhang, Linzhong Zhuang*, Dependence of microstructure, mechanical properties, and inter-granular corrosion behavior of Al-5.1Mg-3.0Zn-0.15Cu alloys with high temperature pre-treatment, Materials Characterization, Vol. 168, 2020, 110512
（11）Yingxin Geng, Di Zhang*, Jishan Zhang, Linzhong Zhuang, Zn/Cu regulated critical strain and serrated flow behavior in Al–Mg alloys, Materials Science & Engineering A, Vol. 795, 2020, 139991.
（12）Yanlin Pan, Di Zhang*, Haoran Liu, Zhaorui Zhang, Hongxiang Li, Linzhong Zhuang, Jishan Zhang*, Reducing welding hot cracking of high-strength novel Al–Mg–Zn–Cu alloys based on the prediction of the T-shaped device, Science and Technology of Welding and Joining, Vol. 25, 2020, 483-489.
（13）Di Zhang*, Zhen Zhang, Yanlin Pan, Yanbin Jiang, Linzhong Zhuang, Jishan Zhang, Xinfang Zhang* Current-driving intergranular corrosion performance regeneration below the precipitates solvus temperature in Al-Mg alloy, Journal of Materials Science and Technology, Vol. 53, 2020, 132-139.
（14）Yingxin Geng, Di Zhang*, Jishan Zhang, Linzhong Zhuang, On the suppression of Luders elongation in high-strength Cu/Zn modified 5××× series aluminum alloy, Journal of Alloys and Compounds, Vol. 834, 2020, 155138.
（15）Qingwei Ding, Di Zhang*, Yu Yan, Linzhong Zhuang, Jishan Zhang*, Role of subgrain stripe on the exfoliation corrosion of Al-4.6Mg-3.1Zn(wt%) alloy, Corrosion Science, Vol. 169, 2020, 108622.
（16）Shengli Hou, Di Zhang*, Qingwei Ding, Jishan Zhang, Linzhong Zhuang*, Solute clustering and precipitation of Al-5.1Mg-0.15Cu-xZn alloy, Materials Science & Engineering A, Vol. 759, 2019, 465-478.
